Introduction of Cement production Line
Home >> Home Improvement >> Interior Design >> Introduction of Cement production Line

Introduction of Cement production Line

Published by: Momorubby (155)
Word Count: 450 | Comments: 0 | Article Views: 105 | Share this article on

Cement production lineconsists of gadget collection like pre-crushing and homogenization, homogenized raw materials preparing, preheat decomposition, cement clinker burning and cement grinding packaging.

1 Pre-crushing and homogenization
1) Pre-crushing: in the manufacturing approach of cement, nearly all of content demands to be smashed like limestone, clay, iron ore and coal etc.
2) Material’s homogenization: the homogenization method is usually to apply scientific material assortment technological innovation to satisfy the preliminary homogenization process of raw materials. Then, the material yard really should be together with the perform of storage and homogenization.

2. Raw material planning
During the process of cement production, every single ton of cement millmust need to have at least three tons of milled powder materials. These kinds of procedure needs the advisable choice of mill system and manufacturing approach, the optimization of the manufacturing capabilities, correct operation, and strict management on assignment program to ensure the item top quality and minimize the energy waste.

3 Raw content homogenization
In the new-type dry cement production method, steady pit-entry uncooked materials composition will be the precondition to stabilize the clinker for that burning thermal method. The clinker homogenization technique plays the position within the last placement to stabilize the pit-entry substance.

4. Preheat decomposition
The preheating and partial decomposition of clinker could be fulfilled by preheater to replace the partial capabilities of rotary kilns to satisfy the purpose for shortage on rotary kilnsize. At the same time, the kiln would get warmth and materials transferring in the form of collection problem. And the preheater would operate while in the floating problem to totally combine the heating from the kiln with clinkers. The contacting surface area of gas materials would be enlarged with fast heating transformation pace. The warmth transferring performance can be high to satisfy the intention of lifting manufacturing performance of kiln method.

5. Cement clinker burning
The clinker would finish the whole process of preheating and decomposition in the rotating preheater. The next thing is the clinker burning approach in the rotating kiln.

6. Cement grinding
The very last approach in cement production line is cement grinding. It is also the process to price probably the most electrical power. Its main purpose is always to mill the cement clinkerinto the powder in correct thickness to fulfill a particular degree of particle normal, which would fulfill the necessity of condensation cement paste and hardening.

7. Cement packing
There are two packing methods of finished cement for delivery. The standard calls for the proportion of bulk packing should really reach over 70%. It is a big pattern to build cement production in bulk packing.

Momorubby - About the Author:

I have written rotary kilns and cement production line many years, I know many thing of these marketing. And this is my web site about cement production line and rotary kilns, you can find the other products about them.

Source: http://articleswrap.com/article/introduction-of-cement-production-line.html
* Required fields
Type the characters you see in the picture below.*