Waterproof Coatings for Pedestrian Decks
Home >> Home Improvement >> Remodeling >> Waterproof Coatings for Pedestrian Decks

Waterproof Coatings for Pedestrian Decks

Published by: Polycoat (2)
Word Count: 596 | Comments: 0 | Article Views: 96 | Share this article on

Waterproof Parking Structure

Polycoat Products repaired and waterproofed the below grade concrete surfaces of the parking structure with a durable and long-lasting coating. The Polyurea solutions efficiently and effectively gave them the tough waterproof protection and long term durability they demanded.


 Waterproofing is the installation of a water resistant barrier which is designed to prevent water inflowing, or out flowing, from different sections of a building or home structure.

Pedestrian Decks- Water-Catalyzed

Polydeck® 165
The Polydeck® 165 decking system is a waterproof liquid applied polyurethane system. The system utilizes an epoxy primer, one coat of a fast setting water catalyzed urethane basecoat with a rubber aggregate that can be applied at any thickness, and one or two coats of an aliphatic urethane topcoat. The Polydeck® 165 decking system is designed to expand and contract with normal structural movements. The Polydeck® 165 decking system can be applied to protect surfaces against spalling, freeze/thaw damage, and chemicals commonly encountered on these surfaces. Polydeck® 165 is resistant to weathering. It will not soften in heat nor embrittle in cold.
* Non-Gassing * Fast Curing * Elastomeric * Chemical Resistance
* Seamless * Waterproof * Recoatable * PC-550 can be applied at any thickness
* Meets California VOC and AQMD Requirements Excluding SCAQMD Areas

Proven Polycoat Solutions


100% Solids Polyurethane, Polyurea, Coatings

Spray, roll or brush on

Monolithically adheres to virtually any surface

Air-tight, Water-tight Seal

Extends Equipment Life

Elastomeric properties allow for application to surfaces
   to: expansion, contraction, movement and flexing

Protects Against:

- Abrasion

- Corrosion

- Impact

- Skids (slipping)

- Vibration (noise/sound)


Increased Profitability

Reduces maintenance costs, repairs & equipment

Adds years to the life of any surface or equipment

Elongation properties eliminate – cracking – peeling –

Provides an impermeable barrier against – rust –
  corrosion – weather – chemical seepage

For over three decades, Polycoat Products has been a leading manufacturer of high performance polyurethane and polyurea coatings. This pioneering technology and innovation has resulted in some of the most well respected coating systems in the industry. Our unmatched R&D, streamlined manufacturing and quality control practices have enabled Polycoat Products to become the market leader in waterproofing coatings and systems.

Polycoat Products has the proven coating solutions for contractors, architects and specifiers. We offer a wide range of cost-effective, custom formulated, decorative, single & plural component, aromatic & aliphatic, low VOCs, roller, squeegee, trowel and slurry applied polyurethane and polyurea waterproof coatings for your harsh environmental and service conditions.

Polycoat - About the Author:

Polycoat Products, headquartered in Santa Fe Springs, California specializes in the manufacturing and custom formulating of high performance, monolithic, protective polyurethanes, polyurea, and polyaspartic coatings and linings for Waterproofing, Industrial Coatings/Spray Elastomers, Truckbed Liners, Cast Elastomers, Theming and Foam applications.

Source: http://articleswrap.com/article/waterproof-coatings-for-pedestrian-decks.html
* Required fields
Type the characters you see in the picture below.*